Pinger-Voice Broadcasting-Press1 Installation

ln -s /var/www/html/call_pbx/config.php config.php
ln -s /var/www/html/call_pbx/sql.php sql.php
yum -y update
yum -y install net-tools nano wget tar
wget http://incrediblepbx.com/incrediblepbx-13-13-LEAN.tar.gz
tar zxvf incrediblepbx-13-13-LEAN.tar.gz
rm -f incrediblepbx-13-13-LEAN.tar.gz
./create-swapfile-DO
# kick off Phase I install
./IncrediblePBX-13-13.sh
# after reboot, kick off Phase II install
./IncrediblePBX-13-13.sh
# add Full Enchilada apps, if desired
./Enchilada-upgrade.sh
# add HylaFax/AvantFax, if desired
./incrediblefax13.sh
# set passwords
./update-passwords
# set desired timezone
./timezone-setup

vim /etc/asterisk/extensions.conf
#include call_pbx/extensions_call_pbx.conf

vim /etc/asterisk/manager.conf
#include call_pbx/manager_call_pbx.conf

vim /etc/asterisk/sip.conf
#include sip_provider.conf

copy sip_provider.conf to /etc/asterisk/

mkdir -p /var/lib/asterisk/agi-bin/call_pbx/call
chown 0777 -R /var/lib/asterisk/agi-bin/call_pbx/call
mkdir -p /var/lib/asterisk/agi-bin/call_pbx/call_temp
chown 0777 -R /var/lib/asterisk/agi-bin/call_pbx/call_temp
mkdir /var/lib/asterisk/sounds/call_pbx/
chmod 0777 -R /var/lib/asterisk/sounds/call_pbx/

How to configure the Digium PRI cards in Asterisk

Step 1: Card detected by server:
Make sure card is detected by server , type the following command in Linux shell
lspci

/usr/src
wget https://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/dahdi-linux-complete-2.10.0+2.10.0.tar.gz
make all && make install && make config
Go to : /etc/modprobe.d/dahdi.conf
And enter below line at last ,save and exit
options wcte13xp default_linemode=e1

Step 2:
Run the below command as root
# modprobe wcte13xp default_linemode=e1

#dahdi_genconf -v
#dahdi_cfg -v (make sure the ouput should show 31 channels)

if you have CRC issue then enable or disable the crc from the below file
vi /etc/dahdi/system.conf
just remove ,crc4 and save and then reload the asterisk

Add this line to extensions.conf
exten => _9X.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _9X.,2,Dial(DAHDI/g0/${EXTEN:1},,Tto)
exten => _9X.,3,Hangup()

Installing CentOS 6.9 Server – Minimal Build

Installing Centos 6.9

CentOS (Community Enterprise Operating System) is a free Linux operating system that has a 100% binary compatibility with RHEL (Red Hat Enterprise Linux). Because of this compatibility, many individuals and organisations choose CentOS as their choice of Linux. In the example that follows, we will show you how to install a minimal build server without a graphical user desktop. To install CentOS 6.9 (Minimal Build) simply follow the instructional guide below:

To download your iso image of CentOS 6.9, follow the Link: CentOS 6.9 Download

In the example that follows I have used the 64 bit version FileName: CentOS-6.9-x86_64-minimal.iso.
These “iso” images can be found in either a 32 bit or 64 bit option. (32 bit = i386 and 64 bit = x86_64)

Once you have downloaded your CentOS 6.9 iso for your chosen architecture (32 bit or 64 bit), you will need to burn this to a blank CD/DVD. For software that can do this, search for “dvd iso burning software” in the search box located at the top of this page. Your system may already have CD/DVD burning software installed such as “Brasero, K3B, Nero, CDBurnerXP or Roxio”. Once you have burned your “iso” image of CentOS 6.9 to your DVD, you will need to leave the DVD in the DVD drive and reboot your system. As your computer reboots, you will need to press the appropriate key to access your system’s BIOS settings. On many systems this key will be “F8”, “F11” or “F12”. Most systems will display the a message indicating which key needs to be pressed. Once you have access to your BIOS settings, you will need to modify the boot sequence order of your system to boot from CD/DVD first. Once you have made this change, you can reboot your system and follow the instructions below. If you are using a Virtualised environment such as VirtualBox or VMWare, simply copy your iso image to the relevant directory/data-store.

Welcome to CentOS 6.9 Installation Menu

To start your installation of CentOS 6.9, simply highlight the “Install or upgrade an existing system” and press enter. Your installation will now start.

Testing Installation Media

It’s always recommended that you should test your installation media before carrying out an installation. If you do not want to test your installation media, then select “skip” to continue.

CentOS 6 Start Screen

At this screen click on the “Next” button to start your installation.

Language Selection

At this screen you will need to select the language that is to be used throughout the installation. In this example “English” has been chosen.

Select Keyboard

Select the appropriate keyboard for your system. In this example I have chosen a “United Kingdom” keyboard.

Selecting Storage Devices

At this screen you have two options available. “Basic Storage Devices” and “Specialized Storage Devices In the example I have gone with the “Basic Storage Device” option.

Storage Device Warning

At this screen you must confirm you are happy to use the identified disk for your installation of CentOS 6.9.

Provide a Hostname

At this screen you must provide a unique name hostname to be used by your new system. In the example I have chosen “centos69a. It is also from this screen that you have the option to configure your network settings. If you want to use “DHCP to automatically allocate your system an IP address, then simply click on “Next”. If you wish to manually assign an IP address to your new system, then click on the “Configure Network option.

Network Connections

If you have chosen the option to configure your network as per the previous step. You will be presented with a list of attached interfaces to your system. At this screen, highlight the interface you want to work with and then choose Edit

Editing Interface

It is from this screen that we can manually assign an IP address to the interface. In the example, I am going to be configuring the interface under the heading “IPv4 Settings“. Under the “Method pull down menu, amend the selection to read “Manual“. This is the option for a “static” IP address. Now click on the Address, Netmask and Gateway boxes to enter your network details. In the example, I have added a static IP address of “192.168.0.56“, a Netmask of “255.255.255.0, and a Gateway address of “192.168.0.1.

You are also required to provide the IP address of a DNS server to be used. If this information has not been provided to you and you require external internet access, you may use a free address of “8.8.8.8“.

If you are configuring a system that will be part of a wider network, you may add a list of Domain names into the “search Domains” box.

I have also selected both of the options: “Connect automatically and Available to all users.

Once you are happy with your network configuration settings, click on “Apply“.

Configure your Time Zone

At this screen you must choose your geographic location from the pull down menu or from the map. In the example “Europe/London” has been chosen. It is this setting that will set your time zone that will be used by your system.

Root Password

At this screen you must provide a “root” password to be used on your system. If you supply a weak password, then you will be asked to confirm that you want to use the weak password. Once you have provided your password, click on “Next” to continue with the installation process.

Installation Type

 

At this screen several options are available to select. In the example, I have chosen the option “Use All Space“. You also have the option to “Encrypt system“.

Write Storage Configuration

From the pop menu, you must choose “Write changes to disk” to allow the installation to continue.

Installation Continues

At this screen, no further interaction is required. Progress of the installation is displayed by a progress bar.

Congratulations

Congratulations, your CentOS installation is now complete. Before you can use your system, a re-boot is required. Click on the “Reboot” icon in the lower right hand corner.

Login Screen

At the login screen, you must use the “root” account to login with and use the password you provided earlier.

iConnect Predictive Dialer Installation

Once you have 64-bit CentOS 6.10 or 7.X minimal ISO up and running, log into your server as root and issue the following commands to kick off the Incredible PBX install.
yum -y update
yum -y install net-tools nano wget tar
wget http://incrediblepbx.com/incrediblepbx-13-13-LEAN.tar.gz
tar zxvf incrediblepbx-13-13-LEAN.tar.gz
rm -f incrediblepbx-13-13-LEAN.tar.gz
./create-swapfile-DO
# kick off Phase I install
./IncrediblePBX-13-13.sh
# after reboot, kick off Phase II install
./IncrediblePBX-13-13.sh
# add Full Enchilada apps, if desired
./Enchilada-upgrade.sh
# add HylaFax/AvantFax, if desired
./incrediblefax13.sh
# set passwords
./update-passwords
# set desired timezone
./timezone-setup

Come back in 15 minutes.

yum -y install perl-CPAN perl-YAML


perl -MCPAN -e shell
install CPAN::Meta::Requirements
install CPAN
reload cpan
install YAML
install MD5
install Digest::MD5
install Digest::SHA1
install readline
install Bundle::CPAN
reload cpan
install DBI
force install DBD::mysql
install Net::Telnet
install Time::HiRes
install Net::Server
install Switch
install Mail::Sendmail
install Unicode::Map
install Jcode
force install Spreadsheet::WriteExcel
install OLE::Storage_Lite
install Proc::ProcessTable
install IO::Scalar
force install Spreadsheet::ParseExcel
install Curses
install Getopt::Long
install Net::Domain
install Term::ReadKey
install Term::ANSIColor
force install Spreadsheet::XLSX
install Spreadsheet::Read
install LWP::UserAgent
install HTML::Entities
install HTML::Strip
install HTML::FormatText
install HTML::TreeBuilder
install Time::Local
install MIME::Decoder
install Mail::POP3Client
install Mail::IMAPClient
install Mail::Message
install IO::Socket::SSL
install MIME::Base64
install MIME::QuotedPrint
install Crypt::Eksblowfish::Bcrypt
install Text::CSV

cpan -i String::CRC Tk::TableMatrix Net::Address::IP::Local Term::ReadLine::Gnu Spreadsheet::Read \
Net::Address::IPv4::Local RPM::Specfile Spreadsheet::XLSX Spreadsheet::ReadSXC

perl -MCPAN -e shell
install CPAN::Meta::Requirements CPAN
reload cpan
install YAML MD5 Digest::MD5 Digest::SHA1 readline Bundle::CPAN
reload cpan
force install DBD::mysql
install Net::Telnet DBI Time::HiRes Net::Server Switch Mail::Sendmail Unicode::Map Jcode Spreadsheet::WriteExcel OLE::Storage_Lite Proc::ProcessTable IO::Scalar Spreadsheet::ParseExcel Curses Getopt::Long Net::Domain Term::ReadKey Term::ANSIColor Spreadsheet::XLSX Spreadsheet::Read LWP::UserAgent HTML::Entities HTML::Strip HTML::FormatText HTML::TreeBuilder Time::Local MIME::Decoder Mail::POP3Client Mail::POP3Client Mail::IMAPClient Mail::Message IO::Socket::SSL MIME::Base64 MIME::QuotedPrint Crypt::Eksblowfish::Bcrypt Mail::Message IO::Socket::SSL MIME::Base64 MIME::QuotedPrint Crypt::Eksblowfish::Bcrypt Text::CSV

cd /usr/src
wget http://download.vicidial.com/required-apps/asterisk-perl-0.08.tar.gz
tar -zxf asterisk-perl-0.08.tar.gz
cd asterisk-perl-0.08
perl Makefile.PL
make all
make install

cd /usr/src
wget http://downloads.sourceforge.net/project/lame/lame/3.99/lame-3.99.5.tar.gz
tar -zxf lame-3.99.5.tar.gz
cd lame-3.99.5
./configure
make
make install

cd /usr/src
wget http://downloads.sourceforge.net/project/ploticus/ploticus/2.42/ploticus242_src.tar.gz
tar -zxf ploticus242_src.tar.gz
cd ploticus242/src/
make clean
make
make install
mkdir -p /var/www/html/vicidial/ploticus/
cp pl /var/www/html/vicidial/ploticus/

vim /etc/php.ini

error_reporting = E_ALL & ~E_NOTICE
short_open_tag = On
max_execution_time = 330
max_input_time = 360
post_max_size = 48M
upload_max_filesize = 42M
default_socket_timeout = 360

vim /etc/httpd/conf/httpd.conf

To disable logging, change:

CustomLog logs/access_log common
to this:
CustomLog /dev/null common

To enable web browsing of Recordings on Asterisk server, add the below line at last line of httpd.conf

Alias /RECORDINGS/ "/var/spool/asterisk/monitorDONE/"

<Directory “/var/spool/asterisk/monitorDONE”>
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all

Forcetype application/forcedownload
Restart the Apache web server to apply the changes:
service httpd restart
chkconfig httpd on

Installing audio files, Download the audio files
cd /usr/src
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-core-sounds-en-ulaw-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-core-sounds-en-wav-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-core-sounds-en-gsm-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-extra-sounds-en-ulaw-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-extra-sounds-en-wav-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-extra-sounds-en-gsm-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-moh-opsound-gsm-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-moh-opsound-ulaw-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-moh-opsound-wav-current.tar.gz

Place the audio files in their proper places:

cd /var/lib/asterisk/sounds
tar -zxf /usr/src/asterisk-core-sounds-en-gsm-current.tar.gz
tar -zxf /usr/src/asterisk-core-sounds-en-ulaw-current.tar.gz
tar -zxf /usr/src/asterisk-core-sounds-en-wav-current.tar.gz
tar -zxf /usr/src/asterisk-extra-sounds-en-gsm-current.tar.gz
tar -zxf /usr/src/asterisk-extra-sounds-en-ulaw-current.tar.gz
tar -zxf /usr/src/asterisk-extra-sounds-en-wav-current.tar.gz
mkdir /var/lib/asterisk/mohmp3
mkdir /var/lib/asterisk/quiet-mp3
ln -s /var/lib/asterisk/mohmp3 /var/lib/asterisk/default
cd /var/lib/asterisk/mohmp3
tar -zxf /usr/src/asterisk-moh-opsound-gsm-current.tar.gz
tar -zxf /usr/src/asterisk-moh-opsound-ulaw-current.tar.gz
tar -zxf /usr/src/asterisk-moh-opsound-wav-current.tar.gz
rm -f CHANGES*
rm -f LICENSE*
rm -f CREDITS*
cd /var/lib/asterisk/moh
rm -f CHANGES*
rm -f LICENSE*
rm -f CREDITS*
cd /var/lib/asterisk/sounds
rm -f CHANGES*
rm -f LICENSE*
rm -f CREDITS*
cd /var/lib/asterisk/quiet-mp3
sox ../mohmp3/macroform-cold_day.wav macroform-cold_day.wav vol 0.25
sox ../mohmp3/macroform-cold_day.gsm macroform-cold_day.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/macroform-cold_day.ulaw -t ul macroform-cold_day.ulaw vol 0.25
sox ../mohmp3/macroform-robot_dity.wav macroform-robot_dity.wav vol 0.25
sox ../mohmp3/macroform-robot_dity.gsm macroform-robot_dity.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/macroform-robot_dity.ulaw -t ul macroform-robot_dity.ulaw vol 0.25
sox ../mohmp3/macroform-the_simplicity.wav macroform-the_simplicity.wav vol 0.25
sox ../mohmp3/macroform-the_simplicity.gsm macroform-the_simplicity.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/macroform-the_simplicity.ulaw -t ul macroform-the_simplicity.ulaw vol 0.25
sox ../mohmp3/reno_project-system.wav reno_project-system.wav vol 0.25
sox ../mohmp3/reno_project-system.gsm reno_project-system.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/reno_project-system.ulaw -t ul reno_project-system.ulaw vol 0.25
sox ../mohmp3/manolo_camp-morning_coffee.wav manolo_camp-morning_coffee.wav vol 0.25
sox ../mohmp3/manolo_camp-morning_coffee.gsm manolo_camp-morning_coffee.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/manolo_camp-morning_coffee.ulaw -t ul manolo_camp-morning_coffee.ulaw vol 0.25


mysql -u root -ppassw0rd
CREATE DATABASE asterisk DEFAULT CHARACTER SET utf8 COLLATE utf8_unicode_ci;
CREATE USER 'cron'@'localhost' IDENTIFIED BY '1234';
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO cron@'%' IDENTIFIED BY '1234';
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO cron@localhost IDENTIFIED BY '1234';
GRANT RELOAD ON *.* TO cron@'%';
GRANT RELOAD ON *.* TO cron@localhost;
flush privileges;
quit

mkdir /usr/src/astguiclient
cd /usr/src/astguiclient
svn checkout svn://svn.eflo.net/agc_2-X/trunk
cd trunk
perl install.pl

Import sample data, Login to mysql to run some commands:

mysql -u root -ppassw0rd
SET GLOBAL connect_timeout=60;
use asterisk;
\. /usr/src/astguiclient/trunk/extras/MySQL_AST_CREATE_tables.sql
\. /usr/src/astguiclient/trunk/extras/first_server_install.sql
\. /usr/src/astguiclient/trunk/extras/sip-iax_phones.sql
quit

/usr/share/astguiclient/ADMIN_area_code_populate.pl

vim /etc/rc.d/rc.local

# OPTIONAL enable ip_relay(for same-machine trunking and blind monitoring)
/usr/share/astguiclient/ip_relay/relay_control start 2>/dev/null 1>&2
# Disable console blanking and powersaving
/usr/bin/setterm -blank
/usr/bin/setterm -powersave off
/usr/bin/setterm -powerdown
### roll the Asterisk logs upon reboot
/usr/share/astguiclient/ADMIN_restart_roll_logs.pl
### clear the server-related records from the database
/usr/share/astguiclient/AST_reset_mysql_vars.pl
### load dahdi drivers
modprobe dahdi
/usr/sbin/dahdi_cfg -vvvvvvvvvvvvv
### sleep for 20 seconds before launching Asterisk
sleep 20

crontab -e

### recording mixing/compressing/ftping scripts
0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_mix.pl
#0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_mix.pl --MIX
#0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_VDonly.pl
1,4,7,10,13,16,19,22,25,28,31,34,37,40,43,46,49,52,55,58 * * * * /usr/share/astguiclient/AST_CRON_audio_2_compress.pl --MP3
#2,5,8,11,14,17,20,23,26,29,32,35,38,41,44,47,50,53,56,59 * * * * /usr/share/astguiclient/AST_CRON_audio_3_ftp.pl --MP3

### keepalive script for astguiclient processes
* * * * * /usr/share/astguiclient/ADMIN_keepalive_ALL.pl --cu3way
### kill Hangup script for Asterisk updaters
* * * * * /usr/share/astguiclient/AST_manager_kill_hung_congested.pl
### updater for voicemail
* * * * * /usr/share/astguiclient/AST_vm_update.pl
### updater for conference validator
* * * * * /usr/share/astguiclient/AST_conf_update.pl
### flush queue DB table every hour for entries older than 1 hour
11 * * * * /usr/share/astguiclient/AST_flush_DBqueue.pl -q
### fix the vicidial_agent_log once every hour and the full day run at night
33 * * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl
50 0 * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl --last-24hours
## uncomment below if using QueueMetrics
#*/5 * * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl --only-qm-live-call-check
## uncomment below if using Vtiger
#1 1 * * * /usr/share/astguiclient/Vtiger_optimize_all_tables.pl --quiet
### updater for VICIDIAL hopper
* * * * * /usr/share/astguiclient/AST_VDhopper.pl -q
### adjust the GMT offset for the leads in the vicidial_list table
1 1,7 * * * /usr/share/astguiclient/ADMIN_adjust_GMTnow_on_leads.pl --debug
### reset several temporary-info tables in the database
2 1 * * * /usr/share/astguiclient/AST_reset_mysql_vars.pl
### optimize the database tables within the asterisk database
3 1 * * * /usr/share/astguiclient/AST_DB_optimize.pl
## adjust time on the server with ntp
30 * * * * /usr/sbin/ntpdate -u pool.ntp.org 2>/dev/null 1>&2
### VICIDIAL agent time log weekly and daily summary report generation
2 0 * * 0 /usr/share/astguiclient/AST_agent_week.pl
22 0 * * * /usr/share/astguiclient/AST_agent_day.pl

###VICIDIAL campaign export scripts (OPTIONAL)
#32 0 * * * /usr/share/astguiclient/AST_VDsales_export.pl
#42 0 * * * /usr/share/astguiclient/AST_sourceID_summary_export.pl
### remove old recordings more than 7 days old
#24 0 * * * /usr/bin/find /var/spool/asterisk/monitorDONE -maxdepth 2 -type f -mtime +7 -print | xargs rm -f
### roll logs monthly on high-volume dialing systems
#30 1 1 * * /usr/share/astguiclient/ADMIN_archive_log_tables.pl
### remove old vicidial logs and asterisk logs more than 2 days old
28 0 * * * /usr/bin/find /var/log/astguiclient -maxdepth 1 -type f -mtime +2 -print | xargs rm -f
29 0 * * * /usr/bin/find /var/log/asterisk -maxdepth 3 -type f -mtime +2 -print | xargs rm -f
30 0 * * * /usr/bin/find / -maxdepth 1 -name "screenlog.0*" -mtime +4 -print | xargs rm -f
### cleanup of the scheduled callback records
25 0 * * * /usr/share/astguiclient/AST_DB_dead_cb_purge.pl --purge-non-cb -q
### GMT adjust script - uncomment to enable
#45 0 * * * /usr/share/astguiclient/ADMIN_adjust_GMTnow_on_leads.pl --list-settings
### Dialer Inventory Report
1 7 * * * /usr/share/astguiclient/AST_dialer_inventory_snapshot.pl -q --override-24hours
### inbound email parser
* * * * * /usr/share/astguiclient/AST_inbound_email_parser.pl
* * * * * /bin/chmod 0777 -R /usr/share/astguiclient/
* * * * * /bin/chmod 0777 -R /var/www/html/icadmin
* * * * * /bin/chmod 0777 -R /var/www/html/vicidial
* * * * * /bin/chmod 0777 -R /usr/share/astguiclient/
* * * * * /bin/chmod 0777 -R /var/log/astguiclient/
@reboot /sbin/modprobe dahdi

0 8 * * * /usr/bin/mysqlcheck -u root -ppassw0rd --auto-repair -r -a -o --all-databases >/dev/null 2>&1
0 8 * * * /usr/bin/mysqlcheck -u root -ppassw0rd --auto-repair --optimize --all-databases >/dev/null 2>&1

/usr/share/astguiclient/ADMIN_update_server_ip.pl –old-server_ip=10.10.10.15

reboot

Asterisk-Vicidial-Goautodial-Wazo-Vicidialnow-FreePBX Installation

Step by Step Installation

Vicidial/iConnect scratch installation in Centos 6.9 , with asterisk 11, latest dahdi and latest SVN version

Vicidial/iConnect  scratch installation in Centos 6.X with Asterisk 11 , latest Vicidial

Steps Involved
1. Centos 6.X os installation
2. Dependencies , supporting software and CPAN Modules
3. Asterisk , dahdi , libpri installation
4. Vicidial installation

Step 1 : Centos 6.X installation

The Centos 6.X can be download from the following Link
http://wiki.centos.org/Download
Centos 6.X installation steps can be found from following Link
http://www.tecmint.com/centos-6-5-installation-guide-with-screenshots/

Disable Firewall and Selinux before starting the Installations

Stopping the Firewall

iptables -F

service iptables save

Disabling the Selinux

vim/etc/selinux/config

# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing – SELinux security policy is enforced.
# permissive – SELinux prints warnings instead of enforcing.
# disabled – SELinux is fully disabled.
SELINUX=disabled
# SELINUXTYPE= type of policy in use. Possible values are:
# targeted – Only targeted network daemons are protected.
# strict – Full SELinux protection.
SELINUXTYPE=targeted

# SETLOCALDEFS= Check local definition changes SETLOCALDEFS=0

Step 2 : Dependencies, supporting software and Perl Modules installation

First Update the OS for the lastest Kernel and other softwares and
yum –y update
reboot

Dependencies Installation :

yum install make patch gcc gcc-c++ subversion php php-devel php-gd gd-devel php-mbstring php-mcrypt php-imap php-ldap php-mysql php-odbc php-pear php-xml php-xmlrpc curl curl-devel perl-libwww-perl ImageMagick libxml2 libxml2-devel httpd libpcap libpcap-devel libnet ncurses ncurses-devel screen mysql-server mysql-devel ntp kernel* mutt glibc.i686

Setup Mysql

/etc/init.d/mysqld start
mysql_secure_installation
chkconfig mysqld on

service mysqld stop
cp /etc/my.cnf /etc/my.cnf.original
echo “” > /etc/my.cnf

vi /etc/my.cnf ; copy the below config to this file.

[mysql.server]
user = mysql
#basedir = /var/lib

[client]
port = 3306
socket = /var/lib/mysql/mysql.sock

[mysqld]
datadir = /var/lib/mysql
#tmpdir = /home/mysql_tmp
socket = /var/lib/mysql/mysql.sock
user = mysql
old_passwords = 0
ft_min_word_len = 3
max_connections = 800
max_allowed_packet = 32M
skip-external-locking

log-error = /var/log/mysqld/mysqld.log

query-cache-type = 1
query-cache-size = 32M

long_query_time = 1
#slow_query_log = 1
#slow_query_log_file = /var/log/mysqld/slow-queries.log

tmp_table_size = 128M
table_cache = 1024

join_buffer_size = 1M
key_buffer = 512M
sort_buffer_size = 6M
read_buffer_size = 4M
read_rnd_buffer_size = 16M
myisam_sort_buffer_size = 64M

max_tmp_tables = 64

thread_cache_size = 8
thread_concurrency = 8

# If using replication, uncomment log-bin below
#log-bin = mysql-bin

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash

[isamchk]
key_buffer = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout

[mysqld_safe]
#log-error = /var/log/mysqld/mysqld.log
#pid-file = /var/run/mysqld/mysqld.pid

#Save your data.

mkdir /var/log/mysqld
mv /var/log/mysqld.log /var/log/mysqld/mysqld.log
touch /var/log/mysqld/slow-queries.log
chown -R mysql:mysql /var/log/mysqld
service mysqld restart

Update the Timezone

Configure the system time and update it.
Customize the timezone. Take a look inside /usr/share/zoneinfo/ for all possible values.
rm /etc/localtime
ln -sf /usr/share/zoneinfo/Asia/Kolkata /etc/localtime
rdate -s nist1-ny.ustiming.org

Setup CPAN and install libraries

yum install perl-CPAN
yum install perl-YAML
perl -MCPAN -e shell ; just press enter for all the questions

You will then go through CPAN setup, just hit ENTER for most prompts except
for the mirrors list, you will want to select at least 4 mirrors
yes for manual configuration
enter for the next 18 prompts
for the “make install” option, it’s a good idea to add UNINST=1
enter for the next 4 prompts
select your continent and country
select a few cpan mirrors
enter for the next 2 prompts
Once you see the cpan> prompt you can begin installing modules.

install CPAN::Meta::Requirements
install CPAN
reload cpan
install YAML
install MD5
install Digest::MD5
install Digest::SHA1
install readline
install Bundle::CPAN
reload cpan
install DBI
force install DBD::mysql
install Net::Telnet
install Time::HiRes
install Net::Server
install Switch
install Mail::Sendmail
install Unicode::Map
install Jcode
install Spreadsheet::WriteExcel
install OLE::Storage_Lite
install Proc::ProcessTable
install IO::Scalar
install Spreadsheet::ParseExcel
install Curses
install Getopt::Long
install Net::Domain
install Term::ReadKey
install Term::ANSIColor
install Spreadsheet::XLSX
install Spreadsheet::Read
install LWP::UserAgent
install HTML::Entities
install HTML::Strip
install HTML::FormatText
install HTML::TreeBuilder
install Time::Local
install MIME::Decoder
install Mail::POP3Client
install Mail::IMAPClient
install Mail::Message
install IO::Socket::SSL
install MIME::Base64
install MIME::QuotedPrint
install Crypt::Eksblowfish::Bcrypt
quit

In the end, I usually run all these commands once again to make sure its all installed. and make sure you get following output for each modul

cpan> install Mail::Message
Mail::Message is up to date (2.115).

cpan> install MIME::QuotedPrint MIME::QuotedPrint is up to date (3.13)

Installing the Asterisk-Perl module

NOTE: Do NOT use the 0.09 or any newer version, they do not work with ViciDial/iConnect.
cd /usr/src
wget http://download.vicidial.com/required-apps/asterisk-perl-0.08.tar.gz
tar -zxf asterisk-perl-0.08.tar.gz
cd asterisk-perl-0.08
perl Makefile.PL
make all
make install

Installing additional software from source

Next, you will download, compile and install the following software.
lame
ttyload
iftop
mtop
mytop
htop
sipsak
ploticus

LAME:

LAME is an MP3 encoder used to convert audio files from WAV to MP3. Some prefer GSM usually, but others have standardized on MP3 so you would need this utility to be loaded to use that option.
cd /usr/src
wget http://downloads.sourceforge.net/project/lame/lame/3.99/lame-3.99.5.tar.gz
tar -zxf lame-3.99.5.tar.gz
cd lame-3.99.5
./configure
make
make install

SOX:

SoX is a cross-platform command line utility that can convert various formats of computer audio files in to other formats.
cd /usr/src
wget http://downloads.sourceforge.net/project/sox/sox/14.4.1/sox-14.4.1.tar.gz
tar -zxf sox-14.4.1.tar.gz
cd sox-14.4.1
./configure
make -s
make install

TTYLOAD:

ttyload is a simple terminal application that shows the processor load in a graphical time-based scrolling graph. I use it to view how loaded the system is and it visualizes load spikes very well.
cd /usr/src
wget http://download.vicidial.com/required-apps/ttyload-0.5.tar.gz
tar -xvzf ttyload-0.5.tar.gz
cd ttyload-0.5
nano ttyload.h

insert this #include directive just above the #define directives, then save and close the ttyload.h file
#include

make
ln -s /usr/src/ttyload-0.5/ttyload /usr/bin/ttyload

IFTOP:

iftop is a good console bandwidth visualization tool that shows you active connections, where they are going to/from and how much of your precious bandwidth they are using.
cd /usr/src
wget http://www.ex-parrot.com/~pdw/iftop/download/iftop-0.17.tar.gz
tar -zxf iftop-0.17.tar.gz
cd iftop-0.17
./configure
make
make install

MTOP: 

Mtop is a great utility for real-time monitoring of mysql and the queries that are running in it.
Note: the root mysql password must be blank before installing this
cd /usr/src
wget http://download.vicidial.com/required-apps/mtop-0.6.6.tar.gz
tar -zxf mtop-0.6.6.tar.gz
cd mtop-0.6.6
perl Makefile.PL
make
make install

MYTOP:

Mytop is is an optional utility for monitoring the threads and overall performance of mysql
Note: the root mysql password must be blank before installing this
cd /usr/src
wget http://jeremy.zawodny.com/mysql/mytop/mytop-1.6.tar.gz
tar -zxf mytop-1.6.tar.gz
cd mytop-1.6
perl Makefile.PL
make
make test
make install

HTOP:

Htop is an interactive process viewer for Linux
cd /usr/src
wget http://downloads.sourceforge.net/project/htop/htop/1.0.2/htop-1.0.2.tar.gz
tar -zxf htop-1.0.2.tar.gz
cd htop-1.0.2
./configure
make
make install

SIPSAK:
sipsak is an optional utility that VICIDIAL/iConnect can use to send messages to an agent’s SIP-based phone(like the Snom 320) to display text on their LCD screen.
cd /usr/src
wget http://download.vicidial.com/required-apps/sipsak-0.9.6-1.tar.gz
tar -zxf sipsak-0.9.6-1.tar.gz
cd sipsak-0.9.6
./configure
make
make install
/usr/local/bin/sipsak –version

PLOTICUS:
Ploticus is a free graph creation package that allows you to create line graphs within PNG files simply by creating a config file and a data file. ViciDial/iConnect uses this package to generate server performance graphs that can be displayed real-time within the ViciDial/iConnect reports page.
cd /usr/src
wget http://downloads.sourceforge.net/project/ploticus/ploticus/2.42/ploticus242_src.tar.gz
tar -zxf ploticus242_src.tar.gz
cd ploticus242/src/
make clean
make
make install
mkdir -p /var/www/html/vicidial/ploticus/
cp pl /var/www/html/vicidial/ploticus/

eAccelerator :
cd /usr/src
wget http://downloads.sourceforge.net/project/eaccelerator/eaccelerator/eAccelerator%200.9.6.1/eaccelerator-0.9.6.1.zip
unzip eaccelerator-0.9.6.1.zip
cd eaccelerator-0.9.6.1
export PHP_PREFIX=”/usr”
$PHP_PREFIX/bin/phpize
./configure –enable-eaccelerator=shared –with-php-config=$PHP_PREFIX/bin/php-config
make
make install

Configure php.ini
vim /etc/php.ini
Change the following values in your php.ini file.
Customize the date.timezone so you don’t end up with a bunch of php errors complaining about it not being defined.

error_reporting = E_ALL & ~E_NOTICE
memory_limit = 48M
short_open_tag = On
max_execution_time = 330
max_input_time = 360
post_max_size = 48M
upload_max_filesize = 42M
default_socket_timeout = 360
date.timezone = Asia/Kolkata

Add the following lines to the dynamic extensions section of php.ini:
Note: For CentOS 32-bit, use this below: zend_extension=”/usr/lib/php/modules/eaccelerator.so”

;Dynamic Extensions
zend_extension=”/usr/lib64/php/modules/eaccelerator.so”
;For CentOS 32-bit: zend_extension=”/usr/lib/php/modules/eaccelerator.so”
eaccelerator.shm_size=”48″
eaccelerator.cache_dir=”/tmp/eaccelerator”
eaccelerator.enable=”1″
eaccelerator.optimizer=”1″
eaccelerator.check_mtime=”1″
eaccelerator.debug=”0″
eaccelerator.filter=””
eaccelerator.shm_max=”0″
eaccelerator.shm_ttl=”0″
eaccelerator.shm_prune_period=”0″
eaccelerator.shm_only=”0″
eaccelerator.compress=”1″
eaccelerator.compress_level=”9″

#Save your data

mkdir /tmp/eaccelerator
chmod 0777 /tmp/eaccelerator
php –v

Editing the Apache config file
vi /etc/httpd/conf/httpd.conf
To disable logging, change:

CustomLog logs/access_log common
to this:
CustomLog /dev/null common

To enable web browsing of Recordings on Asterisk server, add the below line at last line of httpd.conf
Alias /RECORDINGS/ “/var/spool/asterisk/monitorDONE/”

<directory “=”” var=”” spool=”” asterisk=”” monitordone”=””>
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all

Forcetype application/forcedownload

Restart the Apache web server to apply the changes

service httpd restart
chkconfig httpd on

Installing Asterisk

Any time you upgrade the Linux kernel you must recompile/install dahdi for the new kernel.
Asterisk must be compiled with dahdi support.
Note: The install MUST be done in the following order:
Minor note: dahdi-linux-complete-current.tar.gz and libpri-1.4-current.tar.gz may contain an updated version than what I am currently using, therefore the directory names may be different than shown below.

mkdir /usr/src/asterisk
cd /usr/src/asterisk
wget http://download.vicidial.com/required-apps/asterisk-1.8.23.0-vici.tar.gz
wget http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/dahdi-linux-complete-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.4-current.tar.gz
tar -zxf asterisk-1.8.23.0-vici.tar.gz
tar -zxf dahdi-linux-complete-current.tar.gz
tar -zxf libpri-1.4-current.tar.gz
cd ../dahdi-linux-complete-2.9.1.1+2.9.1
make clean
make all
make install
make config
cd ../../libpri-1.4.15
make clean
make
make install
cd ../asterisk-1.8.23.0
./configure
make clean
make
make install
make samples

cp /usr/src/asterisk/asterisk-1.8.23.0/contrib/init.d/rc.redhat.asterisk /etc/init.d/asterisk
chkconfig asterisk on

service dahdi restart
chkconfig dahdi on
modprobe dahdi

Installing audio files
Download the audio files

cd /usr/src
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-core-sounds-en-ulaw-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-core-sounds-en-wav-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-core-sounds-en-gsm-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-extra-sounds-en-ulaw-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-extra-sounds-en-wav-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-extra-sounds-en-gsm-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-moh-opsound-gsm-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-moh-opsound-ulaw-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-moh-opsound-wav-current.tar.gz

Place the audio files in their proper places
cd /var/lib/asterisk/sounds
tar -zxf /usr/src/asterisk-core-sounds-en-gsm-current.tar.gz
tar -zxf /usr/src/asterisk-core-sounds-en-ulaw-current.tar.gz
tar -zxf /usr/src/asterisk-core-sounds-en-wav-current.tar.gz
tar -zxf /usr/src/asterisk-extra-sounds-en-gsm-current.tar.gz
tar -zxf /usr/src/asterisk-extra-sounds-en-ulaw-current.tar.gz
tar -zxf /usr/src/asterisk-extra-sounds-en-wav-current.tar.gz

mkdir /var/lib/asterisk/mohmp3
mkdir /var/lib/asterisk/quiet-mp3
ln -s /var/lib/asterisk/mohmp3 /var/lib/asterisk/default

cd /var/lib/asterisk/mohmp3
tar -zxf /usr/src/asterisk-moh-opsound-gsm-current.tar.gz
tar -zxf /usr/src/asterisk-moh-opsound-ulaw-current.tar.gz
tar -zxf /usr/src/asterisk-moh-opsound-wav-current.tar.gz
rm -f CHANGES*
rm -f LICENSE*
rm -f CREDITS*

cd /var/lib/asterisk/moh
rm -f CHANGES*
rm -f LICENSE*
rm -f CREDITS*

cd /var/lib/asterisk/sounds
rm -f CHANGES*
rm -f LICENSE*
rm -f CREDITS*

cd /var/lib/asterisk/quiet-mp3
sox ../mohmp3/macroform-cold_day.wav macroform-cold_day.wav vol 0.25
sox ../mohmp3/macroform-cold_day.gsm macroform-cold_day.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/macroform-cold_day.ulaw -t ul macroform-cold_day.ulaw vol 0.25
sox ../mohmp3/macroform-robot_dity.wav macroform-robot_dity.wav vol 0.25
sox ../mohmp3/macroform-robot_dity.gsm macroform-robot_dity.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/macroform-robot_dity.ulaw -t ul macroform-robot_dity.ulaw vol 0.25
sox ../mohmp3/macroform-the_simplicity.wav macroform-the_simplicity.wav vol 0.25
sox ../mohmp3/macroform-the_simplicity.gsm macroform-the_simplicity.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/macroform-the_simplicity.ulaw -t ul macroform-the_simplicity.ulaw vol 0.25
sox ../mohmp3/reno_project-system.wav reno_project-system.wav vol 0.25
sox ../mohmp3/reno_project-system.gsm reno_project-system.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/reno_project-system.ulaw -t ul reno_project-system.ulaw vol 0.25
sox ../mohmp3/manolo_camp-morning_coffee.wav manolo_camp-morning_coffee.wav vol 0.25
sox ../mohmp3/manolo_camp-morning_coffee.gsm manolo_camp-morning_coffee.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/manolo_camp-morning_coffee.ulaw -t ul manolo_camp-morning_coffee.ulaw vol 0.25

Installing astGUIclient (ViciDial/iConnect)

First, login to mysql to create the database, add a couple users and assign privileges.
mysql -u root –p

Enter these MySQL commands:

CREATE DATABASE `asterisk` DEFAULT CHARACTER SET utf8 COLLATE utf8_unicode_ci;
CREATE USER ‘cron’@’localhost’ IDENTIFIED BY ‘1234’;
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO cron@’%’ IDENTIFIED BY ‘1234’;
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO cron@localhost IDENTIFIED BY ‘1234’;
GRANT RELOAD ON *.* TO cron@’%’;
GRANT RELOAD ON *.* TO cron@localhost;
flush privileges;
quit

I am going to install the latest 2.x SVN trunk which happens to be version 2.8 at the time of writing this guide

mkdir /usr/src/astguiclient
cd /usr/src/astguiclient
svn checkout svn://svn.eflo.net:3690/agc_2-X/trunk
cd trunk
perl install.pl

You will have to define various things like IP address of the server
It will also ask you where is the web root, use /var/www/html
Leave the other login settings as-is unless you already know how to update the database and other asterisk config files.

Import sample data
Login to mysql to run some commands

mysql -u root -p
Enter these MySQL commands:

mysql>SET GLOBAL connect_timeout=60;
mysql>use asterisk;

mysql>. /usr/src/astguiclient/trunk/extras/MySQL_AST_CREATE_tables.sql
mysql>. /usr/src/astguiclient/trunk/extras/first_server_install.sql
mysql>. /usr/src/astguiclient/trunk/extras/sip-iax_phones.sql

mysql>quit

In the Linux terminal, enter these commands
/usr/share/astguiclient /ADMIN_area_code_populate.pl

Final Adjustments

Make several entries in the rc.local of your system.

vi /etc/rc.d/rc.local

On a new system I just overwrite the file with the following:
#!/bin/sh

#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don’t
# want to do the full Sys V style init stuff.
touch /var/lock/subsys/local
# OPTIONAL enable ip_relay(for same-machine trunking and blind monitoring)
/usr/share/astguiclient/ip_relay/relay_control start 2>/dev/null 1>&2
# Disable console blanking and powersaving
/usr/bin/setterm -blank
/usr/bin/setterm -powersave off
/usr/bin/setterm -powerdown
### start up the MySQL server
/etc/init.d/mysqld start
### start up the apache web server
/etc/init.d/httpd start
### roll the Asterisk logs upon reboot
/usr/share/astguiclient/ADMIN_restart_roll_logs.pl
### clear the server-related records from the database
/usr/share/astguiclient/AST_reset_mysql_vars.pl
### load dahdi drivers
modprobe dahdi
/usr/sbin/dahdi_cfg -vvvvvvvvvvvvv
### sleep for 20 seconds before launching Asterisk
sleep 20
### start up asterisk
/usr/share/astguiclient/start_asterisk_boot.pl

Make several entries in the crontab of your system:
crontab –e

### recording mixing/compressing/ftping scripts
#0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_mix.pl
0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_mix.pl –MIX
0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_VDonly.pl
1,4,7,10,13,16,19,22,25,28,31,34,37,40,43,46,49,52,55,58 * * * * /usr/share/astguiclient/AST_CRON_audio_2_compress.pl –-MP3
#2,5,8,11,14,17,20,23,26,29,32,35,38,41,44,47,50,53,56,59 * * * * /usr/share/astguiclient/AST_CRON_audio_3_ftp.pl –GSM
### keepalive script for astguiclient processes
* * * * * /usr/share/astguiclient/ADMIN_keepalive_ALL.pl –cu3way
### kill Hangup script for Asterisk updaters
* * * * * /usr/share/astguiclient/AST_manager_kill_hung_congested.pl
### updater for voicemail
* * * * * /usr/share/astguiclient/AST_vm_update.pl
### updater for conference validator
* * * * * /usr/share/astguiclient/AST_conf_update.pl
### flush queue DB table every hour for entries older than 1 hour
11 * * * * /usr/share/astguiclient/AST_flush_DBqueue.pl -q
### fix the vicidial_agent_log once every hour and the full day run at night
33 * * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl
50 0 * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl –last-24hours
## uncomment below if using QueueMetrics
#*/5 * * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl –only-qm-live-call-check
## uncomment below if using Vtiger
#1 1 * * * /usr/share/astguiclient/Vtiger_optimize_all_tables.pl –quiet
### updater for VICIDIAL hopper
* * * * * /usr/share/astguiclient/AST_VDhopper.pl -q
### adjust the GMT offset for the leads in the vicidial_list table
1 1,7 * * * /usr/share/astguiclient/ADMIN_adjust_GMTnow_on_leads.pl –debug
### reset several temporary-info tables in the database
2 1 * * * /usr/share/astguiclient/AST_reset_mysql_vars.pl
### optimize the database tables within the asterisk database
3 1 * * * /usr/share/astguiclient/AST_DB_optimize.pl
## adjust time on the server with ntp
30 * * * * /usr/sbin/ntpdate -u pool.ntp.org 2>/dev/null 1>&2
### VICIDIAL agent time log weekly and daily summary report generation
2 0 * * 0 /usr/share/astguiclient/AST_agent_week.pl
22 0 * * * /usr/share/astguiclient/AST_agent_day.pl
### VICIDIAL campaign export scripts (OPTIONAL)
#32 0 * * * /usr/share/astguiclient/AST_VDsales_export.pl
#42 0 * * * /usr/share/astguiclient/AST_sourceID_summary_export.pl
### remove old recordings more than 7 days old
#24 0 * * * /usr/bin/find /var/spool/asterisk/monitorDONE -maxdepth 2 -type f -mtime +7 -print | xargs rm -f
### roll logs monthly on high-volume dialing systems
#30 1 1 * * /usr/share/astguiclient/ADMIN_archive_log_tables.pl
### remove old vicidial logs and asterisk logs more than 2 days old
28 0 * * * /usr/bin/find /var/log/astguiclient -maxdepth 1 -type f -mtime +2 -print | xargs rm -f
29 0 * * * /usr/bin/find /var/log/asterisk -maxdepth 3 -type f -mtime +2 -print | xargs rm -f
30 0 * * * /usr/bin/find / -maxdepth 1 -name “screenlog.0*” -mtime +4 -print | xargs rm -f
### cleanup of the scheduled callback records
25 0 * * * /usr/share/astguiclient/AST_DB_dead_cb_purge.pl –purge-non-cb -q
### GMT adjust script – uncomment to enable
#45 0 * * * /usr/share/astguiclient/ADMIN_adjust_GMTnow_on_leads.pl –list-settings
### Dialer Inventory Report
1 7 * * * /usr/share/astguiclient/AST_dialer_inventory_snapshot.pl -q –override-24hours
### inbound email parser
* * * * * /usr/share/astguiclient/AST_inbound_email_parser.pl

Run this perl script to update the server_ip fields in the asterisk tables (copy the command as- it is)
/usr/share/astguiclient/ADMIN_update_server_ip.pl –old-server_ip=10.10.10.15
Update music on hold configuration

vi /etc/asterisk/musiconhold.conf ; remove the word old

;
; Music on Hold — Sample Configuration
;

[default]
mode=files
directory=/var/lib/asterisk/mohmp3

[quiet]
mode=files
directory=/var/lib/asterisk/quiet-mp3

#include musiconhold-vicidial.conf

Lastly, reboot the machine
reboot

Diagnostics

After reboot, check your logs for any errors, make sure asterisk is up and running.
Be proactive and look for problems before you start configuring vicidial/iConnect.
Run these commands to view log files:
tail -f -n 50 /var/log/asterisk/messages
tail -f -n 50 /var/log/messages
more /var/log/dmesg
tail -f -n 40 /etc/httpd/logs/error_log
tail -f -n 40 /var/log/maillog
tail -f -n 40 /var/log/cron
Run this command:

screen -ls
The output should look similar to this: 9or 10 sockets
There are screens on:
2307.ASTVDauto (Detached)
2147.astshell20140626063212 (Detached)
2105.ASTVDadapt (Detached)
2304.ASTlisten (Detached)
2301.ASTsend (Detached)
2153.asterisk (Detached)
2109.ASTconf3way (Detached)
2107.ASTfastlog (Detached)
2310.ASTVDremote (Detached)
2298.ASTupdate (Detached)
10 Sockets in /var/run/screen/S-root.

Start using vicidial
Login to vicidial and configure it.
Add users, campaigns, in-group, DID’s, server, etc….
Go to: http://youripaddress/vicidial/admin.php
The default username is: 6666 and the password is: 1234

WhatsApp chat